PVC vs. ABS Edge Banding Comparison
Jun 18, 2026
Leave a message
PVC vs. ABS Edge Banding Comparison:
| Feature / Attribute | PVC (Polyvinyl Chloride) | ABS (Acrylonitrile Butadiene Styrene) |
|---|---|---|
| Material Base | Chlorine-based polymer with plasticizers. | Chlorine-free, styrene-based plastic composite. |
| Eco-Friendliness | Difficult to recycle; releases toxic dioxins if incinerated. | Fully recyclable and incinerates safely without toxic gas emissions. |
| Shrinkage & Heat Resistance | Lower heat resistance; shrinks under high temperature or UV exposure. | Higher heat resistance; highly stable in hot or sunny environments. |
| Machining & Flexibility | Very easy to trim, scratch-resistant, but turns white at stress folds if filled with too much calcium. | Easier to trim and scrape cleanly; does not turn white when bent or stressed. |
| Impact Resistance | High impact resistance. | Extremely high impact resistance (excellent for heavy-duty environments). |
| Density & Weight | Higher density; heavier per roll. | Lower density; lighter rolls, lowering shipping and handling costs. |
| Adhesive Compatibility | Works with standard EVA or PUR hot melts (requires a primer layer). | Works with EVA or PUR hot melts (readily accepts adhesives without aggressive primers). |
| Cost | More cost-effective for large production runs. | Slightly higher initial material cost. |