Introduction of drawer side panels

Drawer side panels mainly consist of left and right drawer sidebars, left and right hidden slides, side panel covers, front panel fasteners, left and right high back panel pieces. If the drawer is a medium or high drawer, the high back piece/high back piece, high bar or high board (single/double) should be used in conjunction with the drawer.

1, drawer side panel is not the drawer itself, it is mounted on both sides of the drawer, larger drawer hardware accessories.

2, the material is generally cold rolled steel, if used in a humid environment, the material must be stainless steel.

3、Basic length: 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, according to the international standard size, the height of the side bang is 90mm, you can add the height of the rod to 232mm.

4, static, drawer side panels of the bearing capacity of up to 50KG, dynamic load of 40KG, the quality of the horse riding draw the use of the test should be not less than 50,000 times.

5, the use of drawer side panels, the width of the drawer is basically unrestricted, error drawer side panels are automatically adjusted.
6, now most of the drawer side panels using hidden slides, are silent full pull out, so that the drawer can be used to the maximum. And hidden slides have built-in damping, when closing the drawer, close to the end, the drawer will automatically slow and gentle shut, smooth and steady.

7, in general, nowadays furniture hardware are equipped with a full range of accessories and come with instructions, drawer side panels are no exception, can be quickly installed and removed, three-position panel adjustment.