BUILD INSTRUCTIONS OF ROUND TUBE STEEL LEGS

  Round Tube Steel Table & Desk Legs

• Step 1: Begin by flipping your project surface and the Round Tube Steel Legs upside down. Position the legs on top of the surface and use a tape measure to place them where you want. Make sure to keep the legs stable as you mark each slot with a pencil. If you'd like, you can also add leveling feet for additional stability.
• Step 2: Remove the Round Tube Steel Legs and carefully pre-drill holes through each pencil marking on your surface. Pre-drilling is a helpful step that makes the task easier and prevents any damage to your surface material.
• Step 3: Adjust the positioning of the round tube steel legs and secure them in place by driving fasteners through each hole. Ensure that the fasteners are long enough to accommodate the thickness of the base and about halfway into the surface. If you are attaching the legs to concrete or metal, make sure to use appropriate concrete or metal fasteners.
• Step 4: Once you have securely attached the Round Tube Steel Legs, carefully turn your project right side up. (For larger projects, it's recommended to have someone help you lift them to prevent fasteners from being pulled out of the surface material.)